Protected: Leupold – 34mm Rings

This content is password protected. To view it please enter your password below:

Password:

Advertisements

Protected: Redfield Scope

This content is password protected. To view it please enter your password below:

Password:

Protected: Leupold – VXSS 12-40x60mm Spotter

This content is password protected. To view it please enter your password below:

Password:

Leupold – UltimateSlam 2-7x33mm Riflescope

This was my 3rd project I worked on at Leupold; the UltimateSlam rifle scopes in both 2-7x33mm and 3-9x40mm; matte and silver (MSRP $250).  This product contained the trademark SA.B.R reticle (SAbot Ballistics Reticle) which provides precise and distinct hold points for 50, 100, 150, 200, 250, and 300 yards, accurately with sabots containing 2-pellet or 3-pellet loads and 12 guage or 20 gauge shotgun loads.  The center ring and each aiming point subtends 3″ at the intended range.

This is my SolidWorks model of the silver 2-7x33mm with the SA.B.R. reticle depicted.

Accuracy comparison against competitor.

Leupold – Rifleman 3-9x40mm Riflescope

Rifleman 3-9x40mm riflescope (MSRP $200).  1/2-MOA incremental adjustment.  Duplex reticle.  Also did the 2-7x33mm model.  Model shown below is the QDMA version (you can see the QDMA logo lased on the turret)

This is my SolidWorks model of the matte 3-9x40mm.

Leupold – Prismatic 1x14mm

This was my first product design at Leupold – The illuminated Prismatic 1x14mm rifle scope (MSRP $499).  This scope has a magnification of 1x so you can operate with both eyes open for the superior depth perception and wide field of view that’s crucial for fast target acquisition and reactive shooting.  This was designed with different height mounting spacers to accomodate several weapon platforms.  Also compatible with the A.R.M.S. #22-34mm Throw Lever type mount.  Index Matched Lens System for clarity, brightness, and contrast.  Thickest maintube ever in a Leupold product – meant to be stout and rugged.  Waterproof.  Illumination is a single tact push button with plenty of inteligence such as hold for power on/off, auto-off, and push to cycle through brightness.

This is my SolidWorks model anodized Dark Earth.

For comparison to my SolidWorks model, here's a catalog shot of the real thing in matte black.

  

 

Here's my SolidWorks model with Butler Creek objective flip cover, eyepiece flip cover, illumination assembly, and quick release Picatinny rail mount. Depicted in the lower right is the illuminated circle dot reticle.

   

2011 Leupold Tactical Catatog - Page 25

2011 Leupold Tactical Catatog - Page 24